Thermal actuators are designed to respond to a specified temperature range for heating, cooling, or control/activation applications. Utilizing our exclusive Thermoloid® paraffin wax, the actuator piston retracts or expands based on temperature.
In its “cold position" the wax is solid and the piston is retracted. As temperature increases to within the valve's pre-determined active range, the wax changes into its liquid phase, causing the piston to extend, producing usable stroke and putting the actuator into its “hot position." This piston movement can be used to push/pull, open/close or move a load based on temperature.
At ThermOmegaTech, Inc., we offer printed circuit board (PCB) assembly services. Our general capabilities include prototypes, just-in-time and low-to-high volume production. We support various types of circuit boards such as surface mount, silver through-hole, multilayer, mixed technology, metal core insulated, flexible, etched, single-sided, double-sided and combined.
We utilize hand insertion, reflow, hand soldering, automated, point-to-point wiring, wave and selective solder assembly methods. Our circuit board features include fine line, flush surface, lead free, PCI and plug-in. Materials we work with include fiberglass, polyimide, polyester, phenolic, Kevlar®, Mylar®, Getek® and FR-4. We are well-equipped with stencil printers, multizone reflow ovens, overmolding, selective and wave solder systems.
With top-of-the-line equipment, we support part sizes up to 1200 mm in length and 460 mm in width. Additional services such as burn-in, wiring, rework, repair, potting, inspection, cutting, contract manufacturing, conformal coating, component programming and sourcing are also offered. Lead times are quoted on a job-by-job basis. Blanket orders are supported. Emergency and rush services are available. We are Kaizen/5S, yellow, green and black belt Six Sigma certified. Our efficiency allows us to provide lean manufacturing.
We comply with RoHS, AS9100D, J-STD-001, IPC-A-610, IPC-WHMA-A-620, ANSI/ESD-S.20.20 and DDTC standards. Our clients come from a diverse range of industries including aerospace, agriculture, automotive, defense, chemical, electronics, electrical, energy, lighting, marine, medical, military, mining, nuclear, waste management, robotics, semiconductor, textile and transportation. We also have the capabilities to make products as per ASME, ASTM, AWS, CSA, FDA, ISO, NADCAP, QS, SAE, TS, UL and military standards. To know more about our world-class PCB assembly services, contact us today.
Our Thermal Bypass Valves (TBVs) maintain optimal system temperature by monitoring the inlet flow and diverting the fluid based on temperature, thereby reducing system wear, minimizing warm up times, and extending component life. When the fluid temperature is above the valve's set-point, the TBV automatically diverts flow to the system's cooler or heat exchanger. When the fluid temperature is below the set-point, the flow is bypassed directly to the reservoir and continues to circulate through the system.
Innovatively designed, our TBVs can also be used in mixing applications where controlled outlet temperature is required, modulating between “hot" and “cold" inlet ports, to produce the desired outlet temperature.
Offered in a variety of sizes up to 2" with configurations including ball valves, integrated unions, check valves, strainers, thermometers, and ProPress® ends.
All CircuitSolver® Valves are NSF/ANSI 61 Certified.
ThermOmegaTech®'s QMS is certified to the AS9100 D Standards which includes ISO 9001:2015.
To balance a cold water recirculation system, a CircuitSolver® Union Cold Water thermostatic valve is installed at the end of each branch or riser. The valve automatically monitors and modulates flow based on current water temperatures to maintain a set temperature in the system to mitigate Legionella growth.
The CircuitSolver® Union Cold Water balancing valve uses the same reliable and precise thermal actuator technology as the traditional CircuitSolver® for hot water balancing. Designed with ease in mind, the CSU-CW is offered in sizes ranging 1/2" to 1" and is available in a range of configurations to suit individual system needs.
ThermOmegaTech® offers a variety of self-operating, thermostatic drain valves to protect diesel locomotives and potable water-bearing systems on passenger cars from freeze damage.
ThermOmegaTech®’s QMS is certified to the AS9100 D Standards
ThermOmegaTech® offers a variety of self-operating, thermal relief valves to protect a variety of pumps and mechanical seals from over temperature damage and prevent scalding.
Compact and reliable thermostatic valves used for heating, cooling, or control/activation applications. 100% mechanical these valves rely solely on fluid or ambient temperature to operate.
ThermOmegaTech®’s QMS is certified to the AS9100 D Standards.
ThermOmegaTech® offers a variety of high temperature washdown systems and maintenance equipment to protect industrial production facilities against contamination.
ThermOmegaTech®’s QMS is certified
to the AS9100 D Standards.
Emergency safety showers and eyewash stations are a necessity in any facility where chemical spills are a potential threat. ThermOmegaTech® provides Tepid Water Solutions to ensure these emergency fixtures meet OSHA requirements at all times.
ThermOmegaTech®’s QMS is certified to the AS9100 D Standards.
